Audio Video Amplifier

Build A Simple Audio Video Amplifier

Often when we intend to copy over a video cassette, the results obtained have audio and video quality is poor. This is usually because of the low gain of the audio and video that go into the recording process. For that reason, an equipment which can be up and drop off gain is commonly called the audio video amplifier.

Further by the amount of equipment in the home entertainment center can result in the need for audio and video gain will vary. In order to properly manage those needs you can buy an audio video amplifier is about $ 50 even more expensive because of the development of digital technology in the field of audio and video.

However, our direction is not up to much there, only limited to the need to strengthen the analog signal, that is an analog audio video amplifier. The following AV amplifier circuit aims to suit the needs of the gain for the recording preparation, and several output channels that can be used for other purposes if necessary.

Audio Video Amplifier Circuit Diagram

This simple audio video amplifier circuit is especially helpful when used in conjunction with universal descrambler and stabilizer circuit to make copies of video tapes. We are not only allowed to have the ability to fine tune the strength of the video was also helped transform and enhance the audio recordings are usually to be poor.

Circuit operation is straight forward for amplifier circuits. It was built using the audio IC 5532 (dual channel) and for strengthening the video signal using the IC CA3100. When you want a channel stereo to amplifier audio comprises same components except another part IC1 used. Pin 6, 5 and 7 is the input is the output.

Audio video amplifier circuit is a very basic, but sometimes electronic hobby is something fun for some people. Through this circuit, You may express curiosity about the analog audio video amplifier.

Read more: Programmable Power Supply Circuit – USB Powered FM Transmitter